数控蒸汽锅炉所使用的技术有哪些
    2014-4-18 17:40:36  文章来源:http://www.jnlzsb.com
    数控蒸汽锅炉采用负压、多点配风气化燃烧技术、使燃煤中挥发份充分转化后进行雾化,并得以充分燃烧;采用原煤气化炉膛和燃尽炉膛相配合的双炉膛结构,在原煤气化燃烧炉膛的下方布置了双向二次进风。
    CNC steam boiler adopts the negative pressure, multipoint distribution ethos combustion technology, the transformation of coal volatile flux fully after atomization, and fully burning; Using burning furnace and raw coal gasification furnace with double chamber of a stove or furnace structure, decorate in the raw coal gasification and combustion chamber of a stove or furnace bottom the two-way secondary into the wind.
    采用语音智能操作电控系统,当压力达到设定值后,辅机可自动减缓燃烧速度,既保证了压力需求,又极大的节约了燃煤。能够提供高、低水位、超压语音报警,依靠压力对锅炉进行控制,无需专人指导,按说明即可熟练操作。数控采暖锅炉http://www.jnlzsb.com/
    Using voice intelligent electronic control system operation, when the pressure reaches the set value, the auxiliary machine can automatically slow burning velocity, both to ensure the pressure requirements, and greatly saves coal. Able to provide a high and low water level, the overpressure voice alarm, rely on to control of boiler, pressure without specialist guidance, can skilled operate according to the instructions.
    采用多回程烟管绕动技术,使得原煤汽化炉膛内部产生的煤气能够完全燃尽,提高了燃烧效率,彻底消除了原固定炉排锅炉冒黑烟的现象。
    Multi return pipe winding technology, makes the raw coal gasification furnace gas generated inside can completely burnt out, increase the combustion efficiency, eliminated the phenomenon of the original fixed fire grate boiler smoke.

<友情连结> 新利18luck jxf吉祥坊 云顶斗地主