解读地暖炉不热的系统原因
    2014-10-17 13:53:06  文章来源:http://www.jnlzsb.com
    根据热源方式确定整个环路的管长。集中供暖方式,可以选用最长环路日0—90m,用户单独设立热源,可以选用最长50—60m。
    According to the heat source method to determine the whole loop length. Central heating mode, can choose the longest loop, 0-90 m users, separate heat source can choose the longest 50-60 m. 
    采暖环路上未设置排气装置,造成憋气,系统不热。设计人员应根据热负荷选用合适的盘管间距。间距过大,辐射散热量小,则可能出现不热情况。
    Heating loop is not set on the exhaust system, cause your breath, system is not hot. The designers should be selected according to heat load the appropriate coil spacing. Spacing is too large, the radiation heat is small, not hot may happen. 
    根据房屋结构、朝向不同,应选用不同的热负荷,如果选用一样的,则可能出现设计热负荷小于房间的实际采暖热负荷的情况,造成房间不热。
    According to the building structure, orientation is different, should choose different heat load, if choose, is possible design heat load is less than the actual heating heat load of the room, the room is not hot. 
    地面结构不同,对外散热量各不相同,可能出现地板辐射热量不能满足热负荷的情况,造成房间不热。
    The ground structure is different, different external heat, possible floor radiant heat can't meet the situation of heat load, the room is not hot. 
<友情连结> 新利18luck jxf吉祥坊 云顶斗地主