数控锅炉的最新技术
    2017-5-20 10:25:54  文章来源:http://www.jnlzsb.com
    数控锅炉本身污染物排放少。脱硫,脱硝,除尘设备集成装置,煤粉锅炉的燃烧效率高。PM2.5微粒量小于99%或更激进的燃煤锅炉。目前,工业应用已经开始运行,在全国有超过1000套系统。它的最新技术就是下面小编为大家讲述的。
    The numerical control boiler itself has low emission of pollutants. Desulphurization, denitrate, dust removal equipment integrated, coal dust boiler combustion efficiency is high. PM2.5 particles are less than 99 percent or more aggressive coal-fired boilers. Industrial applications are now running, with more than 1, 000 systems across the country. The latest technology is the following.
    1、采用正压,封闭式多点配风反向燃烧原理,使燃煤中的挥发成份充分转化后进行气化燃烧,具有启动快,燃烧强度高的优点,其中心火焰温度可达1200℃以上。
    1, adopt positive pressure, enclosed air distribution more combustion principle of reverse transformation of coal volatiles in full after gasification and combustion, has quick start, the advantage of high combustion intensity, the center flame temperature can reach more than 1200 ℃.
    2、采用多回程螺纹烟管绕动技术,较传统烟管换热效率提高40--50%,实现了仅为200℃左右的低温排放,极大地降低了热量的流失。
    2, the multipass threaded pipe winding technology, increase thermal efficiency than traditional smoke tube in 40-50%, achieved was only about 200 ℃ low temperature discharge, the loss of heat is greatly reduced.
    3、恒温自动控制,当温度达到设备设定值后,自动减缓燃烧速度,既保证了稳定的出水温度又大大节约了燃煤。
    3, automatic constant temperature control, when the temperature reaches the equipment after the set value, automatic slow burning velocity, both to ensure the stability of the water temperature and greatly save the coal.
    4、采用整体保温,减少了锅炉热量散失。
    4, adopt integral insulation, reduce boiler heat dissipation.
    5、超大储煤仓,一天只加一至二次煤,极大的减少了司炉工劳动强度。
    Large reservoirs of coal, one to two coal a day, greatly reduce the labor intensity of the furnace.
    6、采用微电脑控制系统,锅炉运行自动控制,在正常运行中不需司炉工长期坚守看管。
    Use the microcomputer control system, the boiler operates automatic control, in the normal operation, the fireman will not need to keep watch.
    7、锅炉设计完全按国家工业锅炉规范设计,用材完全符合锅炉用材标准,理论设计寿命长达10年以上。
    The boiler design is designed completely according to the national industrial boiler specification, the material is completely in accordance with the boiler material standard, the theoretical design life is more than 10 years.
    以上就是数控锅炉的最新技术。希望能够帮助到您。以上介绍希望对您有所帮助,我们的产品质量好,价格合理,真诚欢迎大家来选购,我们竭诚为您服务。
    This is the latest technology of CNC boilers. Hope can help you. The above introduction hope is helpful to you, our product quality is good, the price is reasonable, sincerely welcome you to choose and buy, we wholeheartedly serve for you.
<友情连结> 新利18luck jxf吉祥坊 云顶斗地主