数控采暖锅炉如何进行维护和保养
    2016-10-24 10:07:35  文章来源:http://www.jnlzsb.com
    数控采暖锅炉的防腐保养依据不同的停炉时间长短,分为干法保养和湿法保养两种。在锅炉长期停用时,应十分注意炉体外部的防腐保养问题。
    The corrosion protection of the numerical control heating boiler is based on the different length of stop furnace, which is divided into two kinds of dry and wet maintenance. When the boiler is out of service for a long time, it should pay attention to the external corrosion protection of the furnace body.
    首先在锅炉停炉冷却后,必须彻底清除受热面的积灰和炉排上部、炉体下部的灰渣。然后要保持烟道有一定的自然通风。一般情况下,为了防潮应在炉膛、烟道中放置干燥剂。如以生石灰作为干燥剂,则每立方米炉膛或烟道内一般应放置3kg左右。放置后应严密关闭所有的通风门。生石灰变粉后要更换。如锅炉房位置低洼,停炉期间地面泛潮严重时,则应采用经常小火烘烤和放置干燥剂相结合的办法。
    First in the boiler after cooling, we must eliminate the ash deposition on the heating surface of lower and upper grate, furnace slag. And then to keep the flue has a certain natural ventilation. Under normal circumstances, in order to damp should be in the furnace, flue placed desiccant. If the lime is used as desiccant, the furnace or flue of each cubic meter should be placed about 3kg. Close all ventilation doors after placement. After the change of lime powder to be replaced. If the location of the boiler room is low, when the surface of the boiler during the shutdown is serious, it should be combined with the regular small fire baking and placing desiccant.
    至于炉体内部停炉的防腐保养方法,则要按停炉时间的长短来定。一般情况下,停炉不超过一个月的可用湿法保养,一个月以上的应采取干法保养。
    As for the maintenance of the furnace body inside the maintenance method, it should be according to the length of time to stop the furnace to set. Under normal circumstances, the furnace is not more than one month of available wet maintenance, more than one month should be taken dry maintenance.
    我们用满腔的热情、无限的激情对待工作和客户,我们愿意用勤奋的努力和您一起共铸美好明天!
    We are filled with enthusiasm and passion towards work and customers, we are willing to use the hard work and you create a better tomorrow!
<友情连结> 新利18luck jxf吉祥坊 云顶斗地主