壁挂炉安装注意事项
    2014-11-27 11:00:51  文章来源:http://www.jnlzsb.com
    套管机型不宜做单采暖机使用,安装时卫生热水系统必须加装泄压阀,否则有可能会引起热水管路局部过热甚至爆管。因用户的散热片与管路材质形式多样,为避免外围设备中的杂质进入壁挂炉系统而影响正常运行,安装时最好在各回路系统中加装过滤装置。
    Heating of the casing model for single machine, sanitary hot water system must be equipped with pressure relief valve when installation, otherwise may cause local overheating and even detonation tube hot water piping. For users of heat sink and piping materials in a variety of forms, in order to avoid the impurity in the peripheral equipment into the wall hanging furnace system and affect the normal operation, when installing the best installation of filter device in the system of each circuit. 
    安装壁挂炉时,使用的燃气种类必须与壁挂炉标识的燃气种类相匹配,如需更换,必须由公司委派的专业人员操作,用户或代理商不能私自更换,以免造成零部件损坏、经济损失或人员伤亡。
    Installed in cb, using gas species must match the cb logo gas species, such as the need to change, must be appointed by the company of professional operation, the user or agent replacement will not be accepted, so as not to cause components damage, economic loss or loss of life. 
    采暖系统与卫浴系统的泄压阀出水口必须与地漏连接,若安装位置附近无地漏,建议使用管道引到有地漏的地方。因各地自来水压有差异,当水压波动大时泄水口随时都可能有水流出来。
    Heating system and sanitary system outlet pressure relief valve must be connected to the floor drain, if installation location near the floor drain, it is recommended to use piped to a floor drain. Around for tap water pressure difference, when the water pressure fluctuation big sink water will come out may at any time. 
<友情连结> 新利18luck jxf吉祥坊 云顶斗地主