数控锅炉的日常使用方法
    2016-7-20 16:38:29  文章来源:http://www.jnlzsb.com
    数控锅炉平常怎么维护呢?下面小编为您讲解一下:
    CNC boiler usually how to maintain it? Below small make up for you to explain:
    1.用户可根据自己需要,设定锅炉出水温度,当出水温度高于设定温度时,引风机停止工作,从而减缓燃烧速度,当温度低于设定温度时,引风机启动开始工作。
    1. The user can according to their own needs, set boiler water temperature, when the water temperature is higher than the preset temperature, wind machine to stop working, thereby slowing the burning speed, when the temperature is lower than the set temperature, fan started work.
    2.用户可根据自己需要,设定水泵工作温度,当出水温度升高至设定温度时,水泵自动工作。当水温低于设定温度时水泵自动停止工作。
    2 users can according to their own needs, set the pump operating temperature, when the water temperature rises to the set temperature, the pump automatic work. When the water temperature is lower than the set temperature, the water pump stops working automatically.
    3.燃烧过程中,加煤时间要根据炉型及设定使用温度确定,加新煤不可过晚,每次以炉内黑煤刚燃烧完时加煤最好。每次加煤必须在引风机工作时打开炉门加煤,如引风机在停止状态时,必须打开引风机等引风机启动3—5分钟后方可开炉门,开炉门时应站在炉门左侧,打开炉门检查是否有石头或硬焦产生,若有及时勾出,方可加煤。
    3. The combustion process, the time for adding coal to furnace type and the set temperature is determined according to, add new coal can not be late, every time to black coal in the furnace just burning after coal is added to the best. Each time the coal must be in a draught fan work opened the door of the oven and coal, such as the introduction of wind machine in the stop state, we must open the induced fan and draft fan is started 3 - 5 minutes before the open door, opening the furnace door should stand on the left side of the door, open door check whether there is a stone or hard coke produced, if timely check, and coal.
    4.每一个月打开清灰口进行清灰,以防积灰太多影响正常燃烧。
    4 every month to open the ash cleaning mouth, in order to prevent the accumulation of ash too much impact on the normal combustion.
    5.打开第二个出灰门进行清灰,以防止积灰太多堵塞烟管。
    5 to open second out of the ash door for cleaning, in order to prevent the accumulation of ash too much to block the smoke pipe.
    6.烟道连接处的清灰孔至少每月打开一次,认真清理烟道内积灰,确保烟道畅通无阻,以防发生煤气爆炸。
    Junction 6. Flue dust cleaning hole at least monthly open time, carefully cleaning the flue ash, to ensure unimpeded flue, to prevent the occurrence of gas explosion.
    7.封火,关闭引风机或把数控温度调低。
    7 fire, close the fan or the NC temperature down.
    我们会用优良的、贴切的服务,让顾客感受到亲情般的温暖,始终视顾客的安全如己如亲。我们会用自然优势打造产品的独特之处,从而给消费者带来享用产品时独特的心境。
    We will use a good, appropriate service, so that customers feel the warmth of family, always depending on the safety of customers such as yourself. We will use natural advantages to create a unique product, so as to bring consumers to enjoy the unique mood of the product.
<友情连结> 新利18luck jxf吉祥坊 云顶斗地主