数控采暖锅炉讲解壁挂炉清洗技巧
    2014-8-5 10:40:06  文章来源:http://www.jnlzsb.com
    除垢清洗。在清洗槽循环水内按比例加入配置好的除垢清洗剂,进行清洗除垢,根据垢量的多少确定清洗循环的时间和加入药剂多少,确认全部垢质清洗。
    Descaling cleaning. In the circulating water cleaning trough in proportion to join configured descaling cleaning agents, cleaning descaling, according to different levels of scale cleaning cycle time and join the potion, confirm all dirty cleaning.
    离防腐清洗。按比例在清洗槽循环水内加入表面剥离剂和缓释剂,循环清洗20分钟,使垢质和清洗的各部件的分离,同时对没有结垢的物体表面进行防腐处理,防止除垢清洗时清洗剂对清洗部件产生腐蚀。
    Wash away from corrosion. In circulating water cleaning trough in proportion to join surface stripping agent and relievers -, circulating wash for 20 minutes, the scale and quality and cleaning of all parts, separation and no scaling of the surface of the object for anti-corrosion treatment, prevent the descaling cleaning detergent for cleaning parts corrosion.
    清水清洗。将清洗设备和壁挂炉连接好后,采用清水循环清洗10分钟,检查系统状态,是否有泄漏,同时将浮锈清洗掉。

    Clear water to clean. Connect the cleaning equipment and wall hanging furnace, using clear water circulating wash for 10 minutes, check the system status, if there is a leak, the floating rust cleaning away at the same time.

    数控采暖锅炉http://www.jnlzsb.com/

<友情连结> 新利18luck jxf吉祥坊 云顶斗地主