环保采暖锅炉油路系统与水路系统构造
    2013-10-24 13:18:29  文章来源:http://www.jnlzsb.com
     

    环保采暖锅炉油路系统:主要部件有:燃烧器、日用油箱、储油罐及阀门和泵。

    燃烧器-主要零部件有:电机、油泵、点火变压器、喷油嘴、稳烟盘、油过滤器、风门等,工作原理为:风机起动——油泵供油——点火变压器打火——电磁阀打开——给喷油嘴供油——油咀雾化——点火燃烧。

    Environmental protection boiler for heating oil system: the main components are: burner, the daily oil tank, oil tank and pump and valve.

    Main components: motor, burner - pump, ignition transformers, nozzle, stability, oil filters, air door smoke disk, working principle is: Start -- -- -- oil ignition transformer fire electromagnetic valve is opened -- is supplied to the nozzle -- oil nozzle atomization -- fan ignition.

    日用油箱-主要部件有:放空口1个、人孔1个、玻璃管油位计1个、出油口1个、排污口1个规定日用油箱不得超过1M3,放置位置应高于燃烧器。

    Main components: daily oil tank - vent 1, manhole 1, glass tube level gauge 1, out of the oil port 1, the sewage outfall 1 defined daily oil tank shall not exceed 1M3, the position should be higher than the burner.

    放空口:排放油箱内的空气人孔:为了放便工作人员进去清洁油箱内的杂物玻璃管油位计:可以知道油箱内的油量出油口:给燃烧器供油的口径,一般前面加装一只球阀,便于检修燃烧器排污口:排放油箱内的沉定物或残留的水份等。

    Vent: discharge tank air manhole: in order to put it into the cleaning tank crew impurities in the glass tube level gauge: to know the oil in the oil tank of oil outlet: for oil for the burner diameter, generally installed in front of a ball valve, easy to repair the burner outlet: discharge oil within the sediments or the residual water etc..

    环保采暖锅炉储油罐:一般60万卡以上的热水锅炉才配储油罐,大小选配=锅炉用油量×天数(10天左右),重油储油罐应有加热装置。

    进水水路系统:主要部件有:水处理器、软水箱、水泵及阀门等(一般小型热水锅炉无须配水处理及软水箱)。

    水处理器-由于水中的钙、镁在高温下形成水垢附着在锅炉内壁上,从而降低锅炉热效率、浪费燃料、使锅炉出力不足、甚至引进事故等。因此须对进入锅炉的自来水进行软化处理(即除去当中的钙镁物质)。

    软水箱-软化水的贮存器,主要部件有:水位计、温度计、水封、溢水管、泄水管、进水管、出水管、放气管等。一般有圆形和方形两种,底部应装设有支架,当高度>1.5M时,还应设扶梯。

    相关文章:环保采暖锅炉非采暖期保养维护要点

<友情连结> 新利18luck jxf吉祥坊 云顶斗地主