数控采暖锅炉讲解说说采暖锅炉的使用
    2013-11-22 14:56:23  文章来源:http://www.jnlzsb.com
    1.选煤

    1 coal preparation

      适用于无烟煤。烟煤,并以块煤为主,不得使用含硫高的媒,不得使用湿媒泥、媒石及加水美沫。

    Suitable for anthracite. Bituminous coal, and coal based, shall not use high sulfur coal, do not use wet media, media and water mud stone beauty foam.

      2.注水

    2 water injection

      点火前,有补水箱向系统内缓慢注水,同时打开个散热器排气阀,排尽积气,直至系统全部充满水位置,水位保持在补水箱一半为理想水位。严谨缺水或无水状态下使用炉具。

    Before firing, a water tank to the system slow affusion, at the same time to open a radiator exhaust valve, exhaust gas, until the system full of water position, maintain the water level in the water tank fill half as the ideal level. The use of rigorous water stove or anhydrous state.

      3.点火

    3 ignition

      先将压火盖及风挡装置打开,再从炉门投入木柴引燃,烧旺一段时间,最后加入适量燃煤,便进去正常的燃烧阶段。

    The first pressure fire cover and a windshield device open, from the door into the wood ignition, burn for a period of time, the last to join the right amount of coal combustion phase, went back to normal.

      4、取暖炊事

    4, for cooking and heating

      使用过程中,保持炉膛底部红亮,每次加煤前,及时清理炉内积灰和煤渣,保证通风良好。

    The use of the process, to keep the bottom red, each time before the coal ash and cinder, clean the furnace inner product in a timely manner, to ensure good ventilation.

      5、清除灰渣

    5, clear ash

    数控采暖锅炉http://www.jnlzsb.com/ 
<友情连结> 新利18luck jxf吉祥坊 云顶斗地主